Getting Started - Prestigio MultiPad PMP5080CPRO User Manual

Charging indicator
8
Vol +\ Vol - Button
9
Reset
10
Micro SD card slot
11

Getting Started

3.
Charging
 Insert the AC connector to the DC port on the device and connect the
power adapter to the wall socket for charging.
 Normally it takes approximately 4 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charging.
4.
Power on/Power off
 Press and hold the Power Button to turn on the device. It will
automatically enter the Home screen after the several start-up steps.
 Press the Power Button once to enter sleep mode and press it again
to awake the device.
 Press and hold the Power Button, and then tap on Power
off/Standby to power off the device.
5．
Inserting a Memory Card
 The device supports micro SD/SDHC
 To insert a Micro SD card, place the card connector towards the front
side of the device and the printing side of the card towards the rear
side of the device.
 To remove the micro SD card, gently press the edge of the card to
release the safety lock and pull the card out of the slot.
 To access the files on the memory card, select File icon and tap on SD
Card.
Notice:
When you are reading the file from micro SD card, please don't
EN – 2
USER MANUAL
Prestigio MultiPad
PMP5080CPRO
Glows with red while charging, and with
green when fully charged.
Adjust the volume level
Reset the
malfunctioning.
Insert the Micro SD card
cards.
device in case
PMP5080CPRO
of