Getting Started; Charging The Battery; Using The Storage Card - Prestigio PMP7280C3G-Duo User Manual

2. Getting Started

2.1 Charging the battery

Prestigio MultiPad comes with a built-in lithium-Ion rechargeable battery and is designed to use
only manufacture-specified original batteries and accessories. You can see battery status on status bar of
MultiPad in the lower right corner of the home screen. Android OS has battery charge detection system
and notify user if battery charge is low and device need to be connected to AC adapter.. If you will see
such message, or your device couldn't power on, connect original AC power adapter to charge your
device. Insert the connector of adaptor to the USB port on the device and connect the power adapter to
the wall socket for charging To extend the battery operation life, wait for finish of charge process.
Please, fully charge your new device after unpacking.
[Note]: it is normal if the device is warm or hot during charging, you can use it as usual, just follow the
respective security precautions.
Please be informed, that Li-Ion battery is considered to be a consumable part of your MultiPad, it's rated
capacity might fall up to 50% during first two years from the date of purchase; such reduction of capacity
is not a defect and is not covered with warranty.

2.2 Using the storage card

Your new Prestigio MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) Tablet PC is equipped with
Micro SD card slot to extend available device memory. It is compatible with Micro SD/ Micro SDHC card
formats of size up to 32Gb.Proper functioning of larger capacity cards is not guaranteed.
Insert a Micro SD/SDHC cards:
The device supports micro SD/SDHC cards.

To insert a Micro SD card, place the card connector towards the front side of the device and the

printing side of the card towards the rear side of the device.
To access the files on the memory card, select File Browser icon and tap on SD Card.

[Note]: When you are reading the file from micro SD card, please don't remove it, otherwise the device
could fail to operate correctly.
Don't insert or remove the SD card while the device is on. Please insert or remove the SD card while the
device is off.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo)
2
7