Summary of Contents for Prestigio MultiPad PMP5080B
Page 1
Firmware upgrade procedure (32bit) Caution: The firmware upgrading may destroy your data of PMP5080B, please back up your data before upgrading. Update is compatible only with 32bit OS It may be not compatible with USB port driver. Try to change connection to another front/rear USB-port because you have variety of USB 1.0/2.0/3.0 on PC.
Page 2
Right click Computer in the desktop, and then click on Properties. Click on Device Manager. Click on Other devices, then double click Unknown device to continue.
Page 3
Click on Driver, then click on Update Driver…to continue. Click on “Browse my computer…”. Click on “Browse…” to locate the driver manually.
Page 4
Select “Drivers_x32\...” in accordance with your OS, and then click on Ok. Click on Next to continue. It will show “Installing driver sogtware” in the window.
Page 5
A Windows Security box should pop up, click on “Install”. Click on Close to complete the driver installation.
Firmware Upgrade 2. Firmware upgrade Open upgrade tool “RKBatchTool.exe” Power off your PMP5080B, press and hold the “VOL MINUS” button then connect the device with PC via USB cable. c. Device Upgrade Area will become GREEN COLOR...
Page 8
e. Please click ‘Upgrade’ Key to upgrade. 5. If upgrade successfully, such as below picture, the device would be turn on automatically. Initial start should be performed without SD card...
Need help?
Do you have a question about the MultiPad PMP5080B and is the answer not in the manual?
Questions and answers