Docomo SH-07A User Manual page 21

JAN code
JAN code is a type of bar code using vertical
bars of varying width to express numbers.
The code on the right is read as
[4942857119022].
JAN8 and JAN13 can be read.
QR code
QR code is a type of two-dimensional code
expressing data vertically and horizontally.
The code on the right is read as [株式会社
NTTドコモ].
CODE128
CODE128 is a type of bar code using vertical bars of varying width to
express numbers, alphabets, etc.
Download compatible i-appli software to scan CODE128 (nP. 284).
Using text from bar codes (JAN/QR codes)
Use scanned text from bar codes (JAN/QR codes) for functions such as
connecting to i-mode or Full Browser, composing mail, making voice/
Videophone calls, composing SMS and running i-appli.
Some bar codes cannot be scanned depending on types or sizes.
Bar codes may not be scanned due to scratches, dirt, damage, poor print
quality, lighting conditions or QR code version.
1
In the Custom menu, select [Camera]/
[LifeKit]/[Bar code reader].
2
Display bar code (JAN/QR code) to be scanned in the
center of the screen/t.
: Scan the bar code directly without shooting it on the screen.
: Position the camera 10 cm or more from the bar code (JAN/QR
code). Keep aligned and do not move the FOMA terminal or code
while scanning.
: When scanning is complete, an end tone is heard and scan results
appear.
: To interrupt scanning: Press i/c.
Split data
: QR code may be split into a multiple set of codes
(maximum 16) which can be compiled into one
set of data. If split data is scanned, a message
appears. The parentheses show remaining
codes/total codes.
Select [Yes] to proceed to the next QR code
scanning screen. When the next QR code is
shown in the center of the screen, scanning starts automatically.
Repeat until all split data is scanned. Scan results appear.
3
Use the scanned results.
: When scanned characters and numbers are underlined: Select the
scanned text/t.
• Based on the type of scanned text, a screen appears.
: To copy all scanned text: Press i.
Submenu operations for bar code reader screen
■
[Switch camera-mode]/select the camera mode/t
[Saved data]/select the saved data/t
[Switch AF mode]/select the setting/t
For details on switching AF mode nP. 213
10 cm or more
219