Docomo SH-07A User Manual page 11

The image quality is set to [HIGH QUALITY], the AF mode is set to
[Center AF], these settings cannot be changed.
Shooting panoramic pictures is not available when shooting with the sub
camera or when in the Cycloid position. If the sub camera is set or the FOMA
terminal is switched to the Cycloid
picture shooting screen, the normal still picture shooting screen appears.
1
In the still picture shooting screen,
press C/[Select
size]/
[Panorama(2560×640)].
2
Press t.
: After the shooting start sound, panoramic
shooting starts. Move the FOMA terminal to
either direction of left or right within the range
for shooting a panoramic picture (do not move
back once moved to one direction). Steady the
position of the cross mark which appears in
the center at the start of shooting.
: For the moving speed of the FOMA terminal,
make sure that [q] appears as the moving
speed indicator on the lower left of the screen.
: When shooting is almost completed, [t] appears. Even after [t]
appears, the combined image is updated by moving the FOMA
terminal. However, when [u] appears, further updating is not
available. Proceed to step 3.
1
2
Panoramic picture
shooting screen
position while displaying the panoramic
Panoramic picture
shooting screen
1 Cross mark display
Appears in the center of the display
considering the position where the
shooting is started as an origin. Use
this display to check the gap from the
origin when moving the camera.
2 Moving speed display
Indicates the moving speed of the
FOMA terminal.
r
Too slow
q
Appropriate speed
s
Too fast
3
Press t to end shooting.
: After the shooting end sound, the imported images are combined,
and the preview screen appears.
4
Press t.
: Save an image.
While a panoramic picture is shot, zoom and brightness cannot be
adjusted.
If an incoming call is received or the alarm is activated while a
panoramic picture is shot, importing is canceled, and the images being
imported up to that point are discarded.
While a panoramic picture is shot, if no operations are made for
approximately 2 minutes, the camera mode automatically ends and the
stand-by display reappears. The images imported up to that point are
discarded.
When [s] appears, the image quality may deteriorate. Especially when
shooting close subjects, be careful not to display the icon.
When shooting is continued even after [t] appears, the parts shot at
the beginning and ending may be discarded.
Shoot movie
Shooting moving pictures
Shooting starts after the shooting start sound is heard. However,
recording may not begin immediately. Picture Light illuminates while a
moving picture is shot (Picture Light flashes when Switch image/voice is
set to [Voice only]).
Shooting stops automatically when the remaining time indicator reads
00:00:00 (The moving picture file size reaches limit during shooting or
microSD Card has no available space). Shot moving pictures can be
saved/composed mail/played/canceled.
Use Focus lock when there is a focus error (nP. 216).
Continued on next page
209