Panasonic CS-PE9CKE Service Manual page 17

Panasonic ilmalämpöpumput korjaa ja huoltaa pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy
5.Temp Adjusting Button
1. Press this button to change the set temperature
2. If the ON/OFF button is pressed after temperature is set, or change the temperature during operation, or the signal is received
from the remote controller, the indoor indicator will flash or light up to start the operation.
6.Timer Set Button
1) The Function of the Timer-Setting Button
1. SELECT Button
2. Button A and B
The set time can be changed with manner of 1,2,3,4,5,6,7,8,9,10,11,12,1,2,3,4... by pressing the buttons.Pressing the button
A can change the time for ON Timer and OFF Timer, off time for OFF-ON Timer, on time for ON-OFF Timer; Pressing the button
B can change the time for on time for OFF-ON Timer and off time for ON-OFF Timer setting.
3. SET/CANCEL Button
Pressing the button to set or cancel the set timer during the timer setting or activate the previous timer setting.After the timer
setting is determined, "ON" or "OFF" will stop flashing. If the timer setting is cancelled, "ON" or"OFF" will disappear on the
remote control display.The time on the remote control will change every hour.
Notes:
a. During the operation, OFF Timer and OFF- ON Timer can be set.
b. Duing the operation, if the ON Timer or ON-OFF Timer is set, the operation will be stopped.
c. Timer setting can operate only once.
d. If the OFF/ON button on the remote control or the AUTO Switch on the indoor unit is pressed, the timer setting will be
cancelled.
e. If Auto Restart Control occurs , timer setting will be cancelled.
www.ilmalämpöpumput.com
17
CS-PE9CKE / CU-PE9CKE / CS-PE12CKE / CU-PE12CKE