Shimano Ultegra ST-6870 Dealer's Manual page 35

INSTALLATION
Installation of the battery
Installation of the battery cable cover
Set the electric wire for the battery
mount into the groove in the electric
wire cover for the battery mount.
1
Place the accessory spacers in between
the battery mount and the frame and
then secure them by tightening the
bolts.
2
Use the accessory zip tie to secure the
battery mount to the frame.
3
To be continued on next page
(A)
(B)
35
(A)
Spacers
If installing the bottle cage, it is easier to
install it at this stage.
Refer to the Service Instructions for the bottle
cage for details on the tightening torques.
(B)
Zip tie
If there is a mounting boss on the frame, the
battery mount can be secured to the frame
with a bolt.
Battery mount
fixing bolt (M4 × 15 mm)
Tightening torque:
1.2 - 1.5 N·m
{10 - 13 in. lbs.}