Universal Laser Systems VLS2.30 User Manual page 31

7. After connecting the USB cord, the
USB connection. If the wizard offers to connect to
not at this time." Then select "Next" to continue.
a. Select "Install the software automatically." Then Select "Next" to continue. You do not need to insert
the Software Installation CD-ROM.
b. Select "Finish" to close the Wizard.
Note: Another set of New Hardware Wizard windows may appear after the initial USB connection.
Follow the same instructions as mentioned previously. Once completed your USB connection is
established.
"Found New Hardware
"Windows
Wizard" will open to install the drivers for the
Update" to search for software, select "No,
31