Software Installation - Universal Laser Systems VLS2.30 User Manual

Software Installation

At this point you need to install the Universal Control Panel (UCP) and printer driver. In order to install the
software, you need to have administrative privileges on the computer before starting installation. Use the Software
Installation CD-ROM included with your laser system.
1. Insert the Software Installation CD-ROM into your PC's CD/DVD drive. It should automatically launch the
"Universal Control Panel Installation" window. Select the laser system for which you are installing
software.
Note: If the setup window does not automatically launch, you can launch it manually. Locate your CD or
DVD drive using Windows Explorer and launch the Setup.exe application to start installation.
2. The installation process will proceed as indicated by a progress bar.
3. When the installation process is finished, the "Completing the ULS Software Setup Wizard" window will
prompt you to reboot the PC to complete the installation. If you have any other applications running in
windows make sure you save your work prior to rebooting. After the PC finishes rebooting, the software
installation is complete and you are ready to connect your laser system to the PC.
25