Selecting The Hdmi Output Format; Setting The Eye-Fi Communication - Ricoh WG-30 Operating Manual

Selecting the HDMI Output Format

When you connect the camera to an AV device with an HDMI cable, select an
output resolution for playing back images. The default setting is [Auto].
1
Use the four-way controller (23) to select [HDMI Out] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select an output format.
Select an HDMI output format to match the output format of an AV device.
4
Press the 4 button.
The setting is saved.

Setting the Eye-Fi Communication

You can automatically transfer images to a computer or other devices via a
wireless LAN using a commercially available Eye-Fi card. For details on
transferring images, refer to "Transferring Images Using an Eye-Fi Card" (p.172).
6
The default setting is O (On).
1
Use the four-way controller (23) to select [Eye-Fi] in the
[W Setting] menu.
2
Use the four-way controller (45) to select O (On) or P (Off).
O (On) Turns on communication using an Eye-Fi card
P
3
Press the 4 button.
The setting is saved.
To establish an Eye-Fi communication, you first have to specify a wireless
LAN access point and transfer destination on the Eye-Fi card. For details on
how to set up the card, refer to the operating manual supplied with the Eye-
Fi card.
160
(Off) Turns off communication using an Eye-Fi card