Taking Pictures Using A Remote Control Unit (Optional) - Ricoh WG-30 Operating Manual

Taking Pictures Using a Remote Control Unit
(Optional)
You can use a remote control unit (optional) to take pictures while you are away
from the camera.
The shutter will be released after about three seconds when the shutter release
i
button on the remote control unit is pressed.
The shutter will be released immediately when the shutter release button on
h
the remote control unit is pressed.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select i and press the
four-way controller (3).
3
Use the four-way controller (45)
to select i or h and press the
4 button.
The self-timer lamp begins to blink slowly
and the camera is ready to take a picture by
remote control.
When the camera detects a person's face,
the Face Detection function is activated
and the face detection frame appears (p.64).
4
Point a remote control unit at the remote control receiver and
press the shutter release button on the remote control unit.
The focus frame turns green when the subject is in focus and the camera takes
a picture at the following timing.
When i is selected:
The self-timer lamp and the LED Macro Lights blink quickly and the
camera takes a picture after about three seconds.
When h is selected:
The camera takes a picture immediately.
Drive Mode Drive Mode Drive Mode
Remote Control Remote Control Remote Control
MENU MENU MENU Cancel Cancel Cancel
3
OK OK OK OK OK OK
71