Ricoh WG-30 Operating Manual page 78

1
Press the four-way controller (5)
in A mode.
The [Focus Mode] screen appears.
The focus mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
2
Press the 4 button.
The setting is saved and the camera returns to capture mode.
3
• The available modes differ depending on the selected shooting mode.
Refer to "Functions Available for Each Shooting Mode" (p.174) for details.
• The noise from focusing is recorded when a focus mode other than 3 or
s is selected in C (Movie),
Movie) modes.
• When [Auto Macro] is on and shooting with q selected, if the subject is
further than 60 cm away, the camera automatically focuses to ∞ (Infinity).
Saving the Focus Mode setting 1p.108
To Set the Manual Focus
The procedure for setting the focus manually (\) is described here.
1
Press the four-way controller (5) in A mode.
The [Focus Mode] screen appears.
2
Use the four-way controller (5) to select \.
3
Press the 4 button.
The central portion of the image is magnified to full screen on the display.
4
Press the four-way controller
(23).
The \ indicator appears on the display to
indicate the approximate distance to the
subject. Use the four-way controller (23)
to adjust the focus using the indicator as a
guide.
2 for distant focus
3 for closer focus
76
MENU MENU MEN Cancel Cancel Cancel
(Underwater Movie), and
MENU MENU MENU
Focus Mode Focus Mode Focus Mode
Standard Standard Standard
OK OK OK OK OK
(High Speed
2m
1
0.5
OK OK OK
OK OK OK
\ indicator