Selecting The Hdmi Output Format; Setting Up Wireless Lan For Flashair - Ricoh WG-60 Operating Manual

Selecting the HDMI Output Format

When you connect the camera to an AV device with an HDMI cable, select an
output resolution for playing back images. The default setting is [Auto].
1
Use the four-way controller (23) to select [HDMI Out] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select an output format.
Select an HDMI output format to match the output format of an AV device.
4
Press the 4 button.
The setting is saved.

Setting up wireless LAN for FlashAir

You can automatically transfer images to a computer, smart phone, or tablet via
wireless LAN using a commercially available FlashAir card. For details on
transferring images, refer to "Transferring Images Using a FlashAir Card" (p.172).
6
The default setting is P (Off).
1
Use the four-way controller (23) to select [FlashAir] in the
[W Setting] menu.
2
Use the four-way controller (45) to select O (On) or P (Off).
O (On) Wireless LAN function of FlashAir turns on
P
For details about establishing wireless LAN communication of the FlashAir for
transferring images, see the operating manual supplied with the FlashAir
card.
160
(Off) Wireless LAN function of FlashAir does not turn on