Setting Up The Paper Receiving Tray - Riso KZ30 User Manual

KZ30_UG.book Page 22 Monday, December 21, 2009 11:11 AM
Basic Operations

Setting up the Paper Receiving Tray

1
Position the Receiving Tray Paper
Guides and Paper Stopper.
Hold the lower parts of the Receiving Tray Paper
Guides and slide them according to the scale on
the Paper Receiving Tray. Pull the stopper up to
remove it from the Paper Receiving Tray and
place it according to the paper size indicator.
Important!:
• For thick paper, position the Receiving Tray
Paper Guides a little wider than the actual
paper width.
• If you have moved the Feed Tray Paper
Guides, reposition the Receiving Tray Paper
Guides according to them. If the guides are not
correctly positioned, a problem such as a paper
jam can occur.
2
Adjust the Paper Jump Wing.
Adjust the Paper Jump Wing according to the size
of paper.
Loosen the setscrew of each Paper Jump Wing,
and set it to appropriate position. Then, tighten
setscrew to fix each Paper Jump Wing.
22 Preparing to Print
B4(Legal) and larger paper
Align the Paper Jump Wing with the outer side.
(So that A3/B4 is below the setscrew.)
Paper smaller than B4 (Legal)
Align the Paper Jump Wing with the inner side.
(So that A4/B5 is below the setscrew.)