Advertisement
Contact your DSC distributor
www.dsc.com
1-888-888-7838
4
.
Connect the Battery Cable
Ensure the battery cable is properly connected.
5
.
Attach the Front Plate
Install the front plate by simply snapping it onto the back plate.
6
.
Power up the System
Apply power to the PowerSeries 9047 by plugging in the transformer.
7
.
Enroll Wireless Devices
Use the quick enroll feature found in section [898] to enroll wireless devices.
8
.
Programming the PowerSeries 9047
Quickly program (4-digit code) the functions required for basic operation through template
programming, found in section [899]. Code prompts exist for pre-defined zone definitions, reporting
code formats, communication call directions, and DLS setup. Once all codes have been programmed,
you will be prompted to enter the monitoring station telephone number and account code, DLS access
code, entry and exit delays, and installer code.
9
.
Placement Testing
The proposed placement of each wireless device should be tested before it is mounted by entering
section [904]. Testing the signal strength between the PowerSeries 9047 and wireless devices can be
accomplished in a group (global placement testing) or individuall
WWW.DIYALARMFORUM.COM
Pa n e l s, K e y Pa d s & m o d u l e s
Quick-start
Installation Guide
Powerseries
y.
9047
™
Advertisement
