Write Settings To Controller - Club Car 2009 Electric Precedent Maintenance And Service Manual

14
Functions Menu
696
Figure 14-4 Handset Executing

WRITE SETTINGS TO CONTROLLER

This function transfers all of the speed controller settings (except for "private speed mode") from the handset to the
vehicle speed controller. This enables the trained technician to "clone" a speed controller. Once the speed controller
settings have been transferred to the handset, the technician can then connect the handset to another vehicle and
transfer the stored settings into the speed controller.
Speed Controller Cloning – Transferring Settings from the Handset to the Vehicle
1. Perform this procedure with a handset that has the desired speed controller settings. See Speed Controller
Cloning – Transferring Settings from the Vehicle to the Handset on page 14-13.
2. Locate a vehicle that does not have the desired speed controller settings.
3. Turn the key switch to the OFF position, place the Forward/Reverse handle in the NEUTRAL position, and
lock the park brake.
4. Plug the handset into the vehicle.
4.1. Connect one end of the cable to the port located on the bottom of the handset.
4.2. Connect the cable adaptor to the IQDM cable.
4.3. Remove the dust cap from the IQDM port.
4.4. Align the keyed portion of the plug with the IQDM port and connect the plug to the port (Figure 14-1,
Page 14-1).
5. Scroll to the functions menu and select.
6. Select settings.
Page 14-14 2009 Electric Precedent Maintenance and Service Manual
IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: EXCEL SYSTEM
697
Figure 14-5 Confirmation Message