Wizard-Detected Pppoe Login Account Setup - NETGEAR DG834 Reference Manual

Next, the Setup Wizard will report which connection type it has discovered, and then display
the appropriate configuration page. If the Setup Wizard finds no connection, you will be
prompted to check the physical connection between your router and the ADSL line. When the
connection is properly made, the router's Internet LED should be on.
5. The ADSL settings for the multiplexing method and VPI/VCI will update with the preset
defaults. The multiplexing method preset default settings will usually work. Only change the
multiplexing method if you are sure your ISP requires Virtual Path Identifier (VPI) or Virtual
Channel Identifier (VCI) settings that are different from the default values.
Incorrect VPI or VCI settings will prevent you from connecting to the Internet. To change
these settings, click the ADSL Settings link on the main menu. See
page 3-20 for more details.
The procedures for filling in the configuration page for each type of connection follow below.

Wizard-Detected PPPoE Login Account Setup

If the Setup Wizard determines that your Internet service account uses a login protocol such as
PPP over Ethernet (PPPoE), you will be directed to the PPPoE page shown in
Figure 3-10
Enter the PPPoE login user name and password.
Connecting the Router to the Internet
Reference Manual for the ADSL Firewall Router DG834
v2.0, September 2005
"ADSL Settings" on
Figure 3-10:
3-11