NETGEAR DG834 Reference Manual page 123

2. Open the DG834 management interface and click on VPN Policies to get the VPN Policies
screen (Figure 7-38).
Figure 7-37
3. Clear the Enable check box for the VPN tunnel you want to deactivate and click Apply. (To
reactivate the tunnel, check the Enable box and click Apply.)
Using the VPN Status Page to Deactivate a VPN Tunnel
To use the VPN Status page to deactivate a VPN tunnel, perform the following steps:
1. Log in to the Router.
Virtual Private Networking (Advanced Feature)
Reference Manual for the ADSL Firewall Router DG834
v2.0, September 2005
7-33