NETGEAR DG834 Reference Manual page 48

Adsl firewall router
Hide thumbs Also See for DG834:
Table of Contents

Advertisement

Reference Manual for the ADSL Firewall Router DG834
Any — all IP addresses are covered by this rule.
Address range — if this option is selected, you must enter the Start and Finish fields.
Single address — enter the required address in the Start field.
Log
You can select whether the traffic will be logged. The choices are:
Never — no log entries will be made for this service.
Always — any traffic for this service type will be logged.
Match — traffic of this type which matches the parameters and action will be logged.
Not match — traffic of this type which does not match the parameters and action will be
logged.
Inbound Rule Example: Allowing Videoconferencing
If you want to allow incoming videoconferencing to be initiated from a restricted range of outside
IP addresses, such as from a branch office, you can create an inbound rule. In the example shown
in
Figure
4-6, CU-SeeMe connections are allowed only from a specified range of external IP
addresses. In this case, we have also specified logging of any incoming CU-SeeMe requests that
do not match the allowed parameters.
Figure 4-6
4-8
v2.0, September 2005
Protecting Your Network

Advertisement

Table of Contents
loading

Table of Contents