Wizard-Detected Pppoe Login Account Setup - NETGEAR DG834 - ADSL Firewall Router Reference Manual

Reference Manual for the Model DG834 ADSL Firewall Router
The ADSL settings for the multiplexing method and VPI/VCI will update with the preset
5.
defaults. The multiplexing method preset default settings will usually work. Only change the
multiplexing method if you are sure your ISP requires Virtual Path Identifier (VPI) or Virtual
Channel Identifier (VCI) settings that are different from the default values.
Incorrect VPI or VCI settings will prevent you from connecting to the Internet. To change
these settings, click the ADSL Settings link on the main menu. See
3-19 for more details.
The procedures for filling in the configuration page for each type of connection follow below.

Wizard-Detected PPPoE Login Account Setup

If the Setup Wizard determines that your Internet service account uses a login protocol such as
PPP over Ethernet (PPPoE), you will be directed to the PPPoE page shown in
Figure 3-10: Setup Wizard menu for PPPoE login accounts
Enter the PPPoE login user name and password.
3-10
"ADSL Settings" on page
Figure
Connecting the Router to the Internet
3-10: