NETGEAR DG834 Reference Manual page 37

Adsl firewall router
Hide thumbs Also See for DG834:
Table of Contents

Advertisement

7. Select "Use These DNS Servers" if your ISP gave you one or two DNS addresses. Type the
primary and secondary addresses.You should only disable NAT if you are sure you do not
require it. NAT automatically assigns private IP addresses (192.168.0.x) to LAN connected
devices. When NAT is disabled, only standard routing is performed by this router.
Classical routing lets you directly manage the IP addresses the DG834 uses. Classical routing
should be selected only by experienced users.
Note: Disabling NAT will reboot the router and reset all the DG834 configuration
settings to the factory default. Disable NAT only if you plan to install the
DG834 in a setting where you will be manually administering the IP address
space on the LAN side of the router.
Internet Connection Does Note Require A Login
1. If your Internet connection does not require a login, select No and fill in the settings according
to the instructions below.
2. Enter your Account Name (may also be called Host Name) and Domain Name.
These parameters may be necessary to access your ISP's mail or news servers.
3. Internet IP Address:
a. Select "Get Dynamically from ISP" if your ISP uses DHCP to assign your IP address.
Your ISP will automatically assign these addresses.
b. Select "Use Static IP Address" if your ISP has assigned you a permanent, fixed (static) IP
address. Enter the IP address that your ISP assigned. Also enter the IP Subnet Mask and
the Gateway IP Address. The gateway is the ISP's router to which your router will
connect.
c. Select "IP Over ATM (IPoA)" if your ISP uses Classical IP Addresses (RFC1577). Enter
the IP address, IP Subnet Mask, and Gateway IP Addresses that your ISP assigned.
4. Domain Name Server (DNS) Address:
a. Select "Get Dynamically from ISP" if your ISP uses DHCP to assign your IP address.
Your ISP will automatically assign this address.
b. If you know that your ISP does not automatically transmit DNS addresses to the router
during login, select "Use these DNS servers" and enter the IP address of your ISP's
Primary DNS Server. If a Secondary DNS Server address is available, enter it also.
Connecting the Router to the Internet
Reference Manual for the ADSL Firewall Router DG834
v2.0, September 2005
3-19

Advertisement

Table of Contents
loading

Table of Contents