Advertisement
Control Cable Interface: Connects the mount by way of a 9 pin conductor cable to the
NOMAD Universal Controller. The cable is color coordinated for exact connection
configuration. (See Figure Below)
Wiring to 9 Pin Control Connector
Black-Brown-Red-Orange-Yellow-Green-Blue-White-Purple
(Purple is only used on Skewable Mounts, and not required on Non-Skewable Mounts)
Serial Port: Used to provide software upgrades.
From Dish: Coax connection from the dish to the NOMAD Universal Controller.
To Satellite "IN" on Receiver: Coax connection used to connect the NOMAD Universal
Controller to the satellite/LNB connection on the satellite receiver.
Dip Switches: Will provide precise configuration of the NOMAD Universal Controller
to specific satellite TV configurations.
"Caution" -
Power must be turned off before changing Dip Switch settings!
Dip Switches
7
Advertisement
