Advertisement
The purpose of the "MANDATORY" test dish:
A- Automatically determines if the non-skewable mount is a Dome or
Open Face dish. (See pg 8, 9 for "specific" dish switch settings)
B- Checks to ensure proper working order of all (Elevation, Azimuth,
Skew) motor functions.
5-
Upon successful completion of the Test Dish function, turn "OFF" the Power
Switch and set the dip switches to identify your specific mount (skewable or non-
skewable) and satellite service settings such as, Dish Network, Dish 500 (2 LNB),
DirecTV, Direct HDTV (3 LNB), Bell ExpressVu (2 LNB) or Star Choice. (See
pg. 8, 9 Dish Services: Options & Configurations.)
6- After properly setting the dip switches for your application, turn "ON" the Power
Switch on the rear panel of the NOMAD Universal Controller. Start up will take
approximately 5 seconds. Note: When the Power Switch is turned "ON" the
PWR (power), LNB and STOW LEDS will be lit.
NOMAD UNIVERSAL CONTROLLER "FRONT" PANEL
BUTTONS:
FIND: (Find Satellite)
Pressing the Find button will begin the dish "search" to locate and lock
onto the "main" satellite.
For non-skewable single LNB dishes pressing the Find button, while on
satellite enables you to switch between multiple satellites. For example:
(Pressing the find button while locked onto
• Dish Network will toggle between satellites 119 and 110.
• DirecTV will toggle between satellites 101, 110 and 119.
• Bell ExpressVu will toggle between satellites 91 and 82.
• Star Choice will toggle between satellites 107 and 111.*
*Coming soon
4
Advertisement
