Technical Specification - TATA Motors Nano Owner's Manual & Service Book

IMPORTANT TECHNICAL INFORMATION
1. ENGINE
Model
Type
No. of Cylinders
Bore / Stroke
Capacity
Max. Engine Output : 37 PS at 5250 +/-250 rpm as per IS:14599
Max. Torque
Firing Order
Coolant
Engine Oil Capacity : 2.2 Litre
Compression Raio : 10.3 : 1
2. CLUTCH
Type
Friction Area
3. TRANSAXLE
Type
No. of gears
Gear ratios
Final drive ratio
Model
4. SUSPENSION
Front
Rear
82
: 273 MPFI (BS III)
273 MPFI (BS IV)
: 4 Stroke, water cooled, multipoint fuel injection
system, SOHC, 2V/Cylinder
: 2 in-line
: 73.5 mm x 73.5 mm.
: 624 cc
: 51.8 Nm at 3000 +/-500 rpm as per IS:14599
: 1-2
: 50:50 (Water: ethylene glycol)
: Single plate dry friction diaphragm type
Outside diameter of clutch lining : 160 mm
2
: 212 cm
: Synchromesh on all forward gears, sliding mesh
for reverse gear.
: 4 forward & 1 reverse
: 1st - 3.45
2nd - 1.94
3rd - 1.26
: 4.2
: TA 59 - 4/3.45 (4 Speed).
: Independent, Lower wishbone, McPherson Strut
type, with anti-roll bar.
: Independent, Semi-trailing arm with coil spring
and hydraulic shock absorbers.

TECHNICAL SPECIFICATION

4th -
REV. -
0.838
3.07