TATA Motors nano emax Owner's Manual
  1. Manuals
  2. Brands
  3. TATA Motors Manuals
  4. Automobile
  5. nano emax
  6. Owner's manual

TATA Motors nano emax Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for TATA Motors nano emax

Summary of Contents for TATA Motors nano emax

  • Page 3 TA T T T T T A A A A A NANO NANO NANO NANO NANO Owner's Manual & Service Book This owner’s manual should be considered as a permanent part of the vehicle and must remain with the vehicle. Passenger Vehicle Business Unit (PVBU) Mumbai Pune...
  • Page 4 ● The information and specifications given in this book are valid as on the date of printing. TATA MOTORS LIMITED reserves the right to make changes in design and specifications and/or to make additions to or improvements in this product without obligation to install them on products previously sold.
  • Page 5 FOREWARD Dear Customer, Thank you for selecting TATA NANO the most exciting Bi-Fuel CNG car . We welcome you to the world of advanced automotive engineering marvel suited to your operating conditions. This book gives you all the information necessary for making your ownership of this car a delighting experience and help you in all situations.
  • Page 6 CUSTOMER ASSISTANCE SAFETY AND VEHICLE DAMAGE SAFETY SYMBOL WARNINGS In this manual, you will In this manual, you will find also see a circle with a ‘CAUTION’, ‘NOTICE’, ‘WARNING’ slash. This means "Do messages and ‘safety symbol’ at not", "Do not do this", or appropriate places.

  • Page 7: Table Of Contents

    ENVIRONMENTAL CARE GETTING STARTED WARRANTY Key & Door Lock Warranty - Terms & Conditions Door Lock & Seat Adjustment ENVIRONMENT PROTECTION Rear Seat & Seat Folding Environment Protection Seat Belts KNOW YOUR CAR DRIVING Know Your Car Before Driving & Safety Checks Introduction Safety Checks &...
  • Page 8 CONTENTS IMPORTANT TECHNICAL INFORMATION Fuel, Lubricants & Coolants Oil Filling & Drain Points Technical Specification Dimensions CAR IDENTIFICATION Loctation of Aggregate Number SERVICE MAINTENANCE SCHEDULE LIST OF APPROVED CYLINDER TESTING STATIONS RECORD OF SERVICES PERFORMED...

  • Page 9: Warranty - Terms & Conditions

    WARRANTY - TERMS & CONDITIONS We WARRANT each TATA NANO repaired or altered otherwise than and parts there of manufactured by in accordance with our standard us to be free from defect in material repair procedure or by any person and workmanship subject to the other than from our sales or following terms and conditions :...
  • Page 10 WARRANTY - TERMS & CONDITIONS warranty shall not apply to any losses, incidental or indirect, or damage or deterioration caused inconvenience or consequential by environmental pollution or bird damages, loss of vehicle, or loss droppings. This warranty shall not of time, or otherwise, incurred or apply to V-belts, hoses and gas accrued.
  • Page 11 ENVIRONMENTAL CARE TATA MOTORS LTD. is committed the engine running, do not produce vehicles using unnecessarily rev-up.Avoid environmentally sustainable stopping and starting. technology. Many features have Do not rev-up the engine before been incorporated in Tata Motors turning it off as it unnecessarily passenger vehicles which have burns the fuel.

  • Page 12: Environment Protection

    ENVIRONMENTAL CARE Do not pour used oils or 5. Ignition system & Spark plug. coolants into the sewage 6. Catalytic converter. drains, garden soil or open streams. Dispose the used 7. Carbon Canister. filters batteries This Owner ’s manual contains compliance with the current further information on driving legislation.

  • Page 13: Know Your Car

    TATA motors.It is the outcome of extensive research development by Tata Motors Limited. We are happy to present the NANO to you and hope it brings the joy, pride and utility of owning a car for personal mobility.
  • Page 14 KNOW YOUR CAR Fuel-efficient engine The Tata Nano has a rear mounted rear-wheel drive, all-aluminum, two- cylinder, multi point fuel injection petrol engine. The lean design strategy has achieved minimum weight and maximum performance per unit of energy consumed and delivers high fuel efficiency.

  • Page 15: Introduction

    KNOW YOUR CAR INTRODUCTION & SAFETY PRECAUTION 2. SAFETY PRECAUTION: 1. INTRODUCTION TO CNG : To get the best out of CNG fuel, the CNG (COMPRESSED NATURAL engine must be regularly serviced GAS) is principally constituted by (both as regards to the mechanical Methane.

  • Page 16: Safety Precautions

    KNOW YOUR CAR SAFETY PRECAUTIONS devices & their connectors during NOTICE washing. This is to prevent Ensure that your car has sufficient malfunction / failure of electrical petrol in the tank as petrol is used system due to water ingress. intermittently during •...

  • Page 17: Cng System Layout

    KNOW YOUR CAR CNG SYSTEM LAYOUT...

  • Page 18: Starting The Engine

    KNOW YOUR CAR STARTING THE ENGINE & FUEL MODES 4. STARTING THE ENGINE CAUTION NOTICE crank engine Your engine can start either in gas continuosly for 10 seconds at a mode or in petrol mode but it is time .If the engine doesn’t start on always advisable to start in petrol the first try;...
  • Page 19 KNOW YOUR CAR FUEL MODES • In CNG fuel mode vehicle running cluster indicates that CNG receptacle/filler valve is open, and condition, CNG indication lamp vehicle will not start in this turns OFF, it indicates that CNG condition. tanks are empty or no CNG supply.
  • Page 20 KNOW YOUR CAR FUEL MODES CNG - PETROL MODE SELECTION CONDITIONS / PARAMETERS Sr. Condition of fuel modes Vehicle Response When vehicle is running on CNG, Vehicle will switch over to petrol CNG tank gets empty automatically & Petrol fuel gauge will be displayed.
  • Page 21 KNOW YOUR CAR FUEL MODES Sr. Condition of fuel modes Vehicle Response While running in CNG mode, if In some cases, SIL gets ON / any fault occurred. Blink, CNG indicator lamp may OFF. Vehicle may move to petrol mode and cluster will show petrol fuel bar graph.

  • Page 22: Under Bonnet

    KNOW YOUR CAR UNDER BONNET 6. UNDER BONNET 1. Brake Fluid Reservoir 2. Pressure Gauge 3. CNG Filler Valve & Receptacle Cap 4. CNG Refilling Interlock Sensor 5. Spare Wheel 6. CNG compliance plate 7. Petrol Filler Cap 8. Bonnet Opening Lever 9.

  • Page 23: Cng Filler Valve

    KNOW YOUR CAR CNG FILLER VALVE & CNG FILLING 7. CNG FILLER VALVE : 8. CNG FILLING CNG filler valve is used to fill CNG in For filling the CNG, follow the below the cylinder. It is fitted under bonnet procedure.

  • Page 24: Cng Pressure Gauge

    CNG PRESSURE GAUGE & KNOW YOUR CAR KIT IDENTIFICATION PLATE 9. CNG PRESSURE GAUGE : 10. CNG COMPLIANCE PLATE / KIT IDENTIFICATION PLATE : CNG pressure gauge indicates the high pressure in the system. It is Compliance plate / KIT identification located under the front bonnet.

  • Page 25: Cng Cylinder

    KNOW YOUR CAR CNG CYLINDER 11. CNG CYLINDER • All the expenses for CNG cylinder testing has to be borne The CNG cylinders are located below by the customer. the front seats.CNG is stored in a high pressure cylinder at a pressure •...

  • Page 26: Cng Manual On/Off Knob

    • Never remove the cylinder valve driver’s seat. For details refer the from the cylinder assembly, for below image. assistance, contact authorised TATA MOTORS service centre. • Always ensure that, once the cylinder valve is removed from the cylinders, it should not be re- used.

  • Page 27: Cng Warning Lable

    KNOW YOUR CAR CNG WARNING LABLE 13. CNG WARNING LABLE : CNG warning label / safety instruction lables are provided on front windshield glass and on rear RH door.

  • Page 28: 14. Fire Extinguisher

    2. When pressure drops, indicator needle (1) will shift to the red zone (2). Immediately contact nearest TATA MOTORS Authorized dealer. 3. Ensure that the Fire extinguisher is always kept at it’s prescribed position in the vehicle.
  • Page 29 KNOW YOUR CAR FIRE EXTINGUISHER PROCEDURE OF OPERATION 1. Remove the Fire extinguisher from the vehicle and hold it upright. 4. Pull-out the safety pin. 2. Check the pressure gauge needle is in green zone. GREEN ZONE 5. Remove the plastic insert. 3.
  • Page 30 KNOW YOUR CAR FIRE EXTINGUISHER 6. Squeeze the levers in the direc- 4. Also check the gross weight of tion as shown in the image. extinguisher periodically. If found 10% less than stamped weight, please get it refilled immediately. 7. Direct the jet discharge from nozzle at base of flame with a rapid (fast) sweeping motion.

  • Page 31: An Overview

    AN OVERVIEW DRIVING CONTROLS DRIVING CONTROLS Note : a. HVAC or AC System is applicable to certain models. b. Music System is part of accessories. 1. Side air vents 10. Accelerator pedal 2. Provision for Speakers on dash 11. Brake pedal board 12.

  • Page 32: Instrument Cluster & Indicators

    AN OVERVIEW INSTRUMENT CLUSTER Some Indicators shown may not be applicable to all models. 9. Parking brake / Brake fluid 1. Front fog lamp indicator check indicator 2. Speedometer 10. Battery charging indicator 3. High beam indicator 11. Trip / Rest knob 4.
  • Page 33 AN OVERVIEW INDICATORS Turn Signal Indicator : High Beam Indicator : Turn signal indicators can be The indicator light comes on when operated only when ignition is ‘ON’. the High beam is selected or also They can be operated by using the when he headlight flasher is turn indicator switch on the combi- operated.
  • Page 34 NOTE : In case the fault occurs and causes emission levels to increase. MIL on the instrument cluster comes ON, contact nearest TATA MOTORS The OBD system also has a authorized service center. After diagnostic connector that can be...
  • Page 35 Drive cautiously when the also start to warn the driver. indicator remains ‘ON’ while Avoid driving in this situation and driving. Get the problem attended contact nearest Tata Motors immediately at an Authorized authorised service station for service Outlet.In the state of low...
  • Page 36 AN OVERVIEW INDICATORS & GAUGES necessary attention. Vehicle Speed Limitation: If the driver continues to drive in such The vehicle is designed for a safe situation, both lamps and buzzer (as speed of 105 kmph. If vehicle is described above) will continue and driven above this speed, MIL lamp the ECU activates the engine to limp starts blinking and the vehicle fuel...

  • Page 37: Fuel Gauge

    AN OVERVIEW INDICATORS & GAUGES to measure the distance traveled on each trip or between fuel fillings. Trip meter reset knob is provided on instrument cluster. Keep track of the odometer reading and follow the maintenance schedule regularly for better performance. Fuel Gauge Fuel indicates...

  • Page 38: Steering Lock Cum Ignition Switch

    AN OVERVIEW STEERING LOCK CUM IGNITION SWITCH START : Steering Lock cum Ignition Switch: Turn the key further clockwise to the START position (spring loaded) to start the engine. As soon as the engine starts release the ignition key to ON position. While cranking, all accessories will be momentarily ‘OFF’.

  • Page 39: Combination Switch

    AN OVERVIEW COMBINATION SWITCH Single Stalk Combination Switch: b) Position lamp ON. (if applicable) Position (Parking) lamp and tail lamp Single Stalk Combination Switch is will be ON in this position. provided on right hand side of steer- ing column. It has wiper control, direction indicator and light control switches.
  • Page 40 WIPER CONTROL SWITCH AN OVERVIEW COMBINATION SWITCH 3) Side Indicator : 1) Side indicator OFF 2) Lane change for Left or Right Turn (Spring Return) 3) Lane change for Left or Right Turn (Self cancellation / Manual RIGHT TURN return type) Push the stalk upwards for changing lane or turning to Left and downwards for changing lane or turning to Right...
  • Page 41 AN OVERVIEW COMBINATION SWITCH A) RIGHT HAND STALK 2) Fog Lamp Rotary Switch : 1) Light stalk: Inner rotary switch on the stalk is provided for selecting front fog lamp. Outer rotary switch on right hand stalk is provided for selecting Position a) Front Fog Lamp (Parking) or Head lamp.

  • Page 42: Music System

    AN OVERVIEW COMBINATION SWITCH Music System (if applicable) : 3) Side Indicator : Push the stalk upwards for changing lane or turning to Left and downwards for changing lane or turning to Right according to requirement. It has three positions. The music system can be fitted on the facia.
  • Page 43 AN OVERVIEW HVAC & AIR CONDITIONING B. Blower Speed selection Knob : HVAC / A.C. : (As provided) The HVAC system has a three speed blower. The blower speeds can be selected by operating the blower knob (B). HVAC A - Air direction mode selection knob C.
  • Page 44 AN OVERVIEW HVAC & AIR CONDITIONING E. Recirculation / Fresh Air knob: Whenever discomfort is felt switch to fresh air circulation mode. Recirculation Fresh Air NOTICE mode mode • We strongly recommend AC to be used in recirculation mode for better cooling. •...
  • Page 45 AN OVERVIEW HVAC & AIR CONDITIONING Normal Heating : (Only on HVAC) cooling (Blue) position (For HVAC only). At maximum cooling, AC trips (For vehicles fitted with HVAC) off automatically when the desired Knob 'A' - At suitable position as per temperature is achieved.
  • Page 46 AN OVERVIEW HVAC & AIR CONDITIONING Ventilator : NOTICE When mist gets cleared switch the knob "A” position to Face mode. In high humidity areas, if cold air continues flow over windshield, it may cause sudden fogging on outside surface of windshield.

  • Page 47: Lamps

    AN OVERVIEW LAMPS Head Lamp: Tail Lamp: High / Low Beam The tail lamp assembly incorporates Position / Parking Lamp the following : Front Direction Indicator Tail / Brake Lamp Turn Signal Indicator Head lamps are clear lens type having Reverse Lamp multi focal reflector and are provided Reflex Reflector...
  • Page 48 AN OVERVIEW LAMPS High Mounted Stop Lamp : Interior Lamp : DOOR OFF High mounted stop lamp is provided Interior lamp is provided on the roof, on the rear side of vehicle. It will glow near the inner rear view mirror. It’s along with stop lamps whenever switch has three positions.

  • Page 49: Rear View Mirrors & Sun Visor

    AN OVERVIEW REAR VIEW MIRRORS & SUNVISORS Inner Rear View Mirror : WARNING NOTICE Inner rear view mirror is provided Be careful when judging the size inside the cab and fitted to or distances of a vehicle or other windshield glass. object seen in the side convex Nano comes with both normal and mirror.

  • Page 50: Cup Holder & Window Winding

    ROOF GRAB HANDLE, UTILITY POCKET/BOX, AN OVERVIEW CUP HOLDER & WINDOW WINDING FLOOR CONSOLE : NOTICE Cup holder : (if applicable) When not in use keep the sun visors in their original position other wise they may lock the driver’s vision. Roof Grab Handle :(If fitted) Two cup holders are provided on the floor console near the gear...

  • Page 51: Parking Brake

    AN OVERVIEW WINDOW WINDING & PARKING BRAKE LEVER Manual window winding : Parking Brake Lever : 1. Parking Brake Lever Where power windows are not 2. Release Button provided, manually operated winder handles are provided. Use winder Mechanical parking brake acting handle for lowering down or raising only on the rear wheel is provided up window glasses.

  • Page 52: Gear Shift Lever & Refuelling

    AN OVERVIEW GEAR SHIFT LEVER & REFUELING Gear Shift Lever : Fuel filling cap is located inside the front hood. For refueling you need to open the front hood. Rotate fuel filler anitclockwise and open to fill the fuel. After filling the fuel close the cap by rotating clockwise till you heard clicking sound.

  • Page 53: Front Hood Opening & Closing

    AN OVERVIEW FRONT HOOD OPENING & CLOSING Opening the front hood : Lift the hood up. Pull the hood stay rod from its clip & insert the free end Ensure that the vehicle is in neutral into the slot in the hood, slide stay gear with the parking brake applied.

  • Page 54: Getting Started

    GETTING STARTED KEYS & DOOR LOCK Keys : The key operates all locks and Ignition switch. A code number is stamped on the plate attached to the key set. Detach Locking / unlocking doors with key this plate and store at safe place (Not from outside : in the vehicle).

  • Page 55: Door Lock & Seat Adjustment

    GETTING STARTED DOOR LOCK OPENING & SEAT ADJUSTMENT Opening the doors from inside : Seat Back Recliner : (As Appicable) To change the seat back angle, lean Location of door opening lever/ forward slightly and raise the lever latch (2). Then lean back to the position you want and release it.

  • Page 56: Rear Seat & Seat Folding

    Getting Started REAR SEAT Rear Seat 2) Fold the seat back rest, once it is unlocked. A cushion bench seat is provided for Locking rear seat back rest the rear passengers. For locking the rear seat back rest, Location of storage splace : lift the seat back rest and just press it to engage in the lock.

  • Page 57: Seat Belts

    GETTING STARTED SEAT BELT SEAT BELTS : Occupants safety is of utmost importance. Your car is equipped with seat belts, both front and rear as a part of occupant restraint system. Why Seat Belts Wearing seat belts properly can protect you from being thrown 1.
  • Page 58 GETTING STARTED SEAT BELT 10. The belts if required should be WARNING replaced, Authorised Improper positioning of the personnel only. shoulder portion of the seat belt 11. The belt should is dangerous. An improperly disassembled. If required, positioned belt will provide little authorised personnel only or no protection in a collision.
  • Page 59 Failure to do so could increase the chance of injury and / or the severity of injury in accidents. Baby or Small Child : TATA MOTORS recommends the use of a seat-belt. Kindly consult your doctor specific recommendations. The lap belt...

  • Page 60: Driving

    DRIVING BEFORE DRIVING & SAFETY CHECKS 7. Check and ensure that all the BEFORE DRIVING gauges and indicators in the Please ensure to check (Refer instrument cluster are working. maintenance) 8. Gear shift lever is in neutral 1. Tyre pressure and condition of position tyres.

  • Page 61: Safety Checks & Driving Safety

    DRIVING SAFETY CHECKS & DRIVING SAFETY Horn DRIVING SAFETY Ensure the horn is working properly. Seat Belt Horn provides safety to other road Seat-belts are life saving equipment, users by alerting your presence. use of seat-belt reduces the chance of injury and severity of injury in case Brakes of an accident.

  • Page 62: Fuel Economy

    DRIVING FUEL ECONOMY FRIENDLY TIPS TO IMPROVE FUEL Fuel economy speeds : ECONOMY : Always adhere to following fuel Your vehicle's fuel economy is mainly economy speeds. dependent on your style of driving. Gear Speed (kmph) To operate your vehicle as economically as possible, adhere 20 - 30 to following driving suggestions.

  • Page 63: Starting, Stopping

    DRIVING STARTING / STOPPING THE ENGINE & PREPARING TO DRIVE Starting the Engine Stopping the Engine Before starting Before switching off the engine, run the engine in idle condition for at least 1. Apply parking brake. 30 seconds and then switch ‘OFF’. 2.

  • Page 64: Gear Shifting, Braking & Parking

    DRIVING GEAR SHIFTING, BRAKING & PARKING Gear Shifting : The non-booster type braking system may not be fitted in the The gearshift pattern is shown on the Standard model, while the CX and gear shift lever knob. All forward LX models are provided with gears being synchronized, provide booster-assisted braking system.

  • Page 65: Driving In Adverse Conditions

    DRIVING DRIVING IN ADVERSE CONDITION Driving Through Water : Driving on a Rainy Day : Never venture to drive through water Check brakes, steering, windows, when it flows over the guard stones tyres for wear and tyre pressure. on a bridge. Check wiper blades for proper functioning.
  • Page 66 DRIVING DRIVING IN ADVERSE CONDITION Use side indicators for lane change If the wheels start to slip within few or turning. feet of the end of the climb, motion can be maintained by swinging the Switch on hazard warning switch in steered wheels left and right, thereby case of hazardous parking or if your providing increased grip.

  • Page 67: Incase Of Emergency

    ADVANCE WARNING TRIANGLE & INCASE OF EMERGENCY HAZARD WARNING SWITCH Advance Warning Triangle : Hazard Warning Switch : An advance warning triangle is Use Hazard Warring lights besides provided along with your vehicle. In advance warning triangle in case of case there is a breakdown and or the breakdown specially during night vehicle is to be parked at the side of...

  • Page 68: If You Have Flat Tyre

    INCASE OF EMERGENCY IF YOU HAVE A FLAT TYRE IF YOU HAVE A FLAT TYRE: Important information about 1. Reduce vehicle speed gradually Tyre sizes of your Car keeping it in a straight line. Move To achieve the optimum vehicle cautiously off the road to safe performance, your vehicle is fitted place away from traffic.
  • Page 69 INCASE OF EMERGENCY IF YOU HAVE A FLAT TYRE Location and Removal of Spare folded. For the rear seat folding wheel: procedure, refer page no. 54. REMOVAL OF JACK To remove jack rotate the wing bolt in anticlock wise direction to lower down.
  • Page 70 INCASE OF EMERGENCY IF YOU HAVE A FLAT TYRE flat tyre. (Do not remove the flat tyre Remove wheel-mounting bolts and at this stage). take out flat tyre and cover (if fitted). Engage the jack properly at correct Roll the spare wheel into position and jacking point (In between dimple align the holes in the wheel with marks provided at front &...

  • Page 71: Starting The Engine With Jump Leads

    STARTING THE ENGINE INCASE OF EMERGENCY WITH JUMP LEADS • Starting the Engine with Jump Switch off all unnecessary Leads : electrical loads. • The engine with a discharged Do not lean over the battery battery started during jump starting. transferring electrical power from a •...

  • Page 72: Towing The Car

    STARTING THE ENGINE INCASE OF EMERGENCY WITH JUMP LEADS Following order should be Towing the Vehicle : followed while connecting battery • For towing a vehicle, the best leads : way is to use a wrecker. 1. Positive (+) of Good battery to •...
  • Page 73 INCASE OF EMERGENCY TOWING THE CAR • Securing the towing hook: Place the towing hook and wheel spanner back in the At Front : vehicle tool kit. • Provision for fitment of towing Transporting the vehicle : hook is provided on front bumper as indicated.

  • Page 74: Routine Service

    INCASE OF EMERGENCY ROUTINE SERVICE This manual will help you to Several maintenance procedures understand your vehicle. Inspection, can be done only by a qualified maintenance of the vehicle should service technician with special be entrusted to the professionals tools. Improper do it ourself only.

  • Page 75: Preliminary Trouble Shooting

    PRELIMINARY TROUBLE SHOOTING These tips are given for your guidance. These preliminary checks can be carried out in an emergency. In normal cases the problems should be attended to in an Authorized Service outlet by following the repair procedures given in the Workshop Manual.
  • Page 76 PRELIMINARY TROUBLE SHOOTING PROBLEM OBSERVED PROBLEM CAUSE ACTION TO BE TAKEN ENGINE (Contd) Clogged fuel filter Clean/ Replace the element Clogged air filter Clean/ Replace the element Clutch slipping/ out of Get it rectified adjustment Brakes grabbing Get it rectified Does not accelerate Accelerator cable broken Get cable replaced...
  • Page 77 PRELIMINARY TROUBLE SHOOTING PROBLEM OBSERVED PROBLEM CAUSE ACTION TO BE TAKEN BRAKES (contd) (for booster vehicle) Brake oil (line) leaking Replace the leaking line. Oil on the brake drum/ liners Get the liners cleaned/ seals if leaking. replace. Worn brake lining Get the liners replaced.
  • Page 78 PRELIMINARY TROUBLE SHOOTING PROBLEM OBSERVED PROBLEM CAUSE ACTION TO BE TAKEN Non functioning Elect. Fuse blown in the circuit Replace the fuse if blown. accessories such as Loose connectors Get the connection properly power windows, head tightened / fixed. lamps, fuel & temp. Circuit relay/ controllers Fix the relay firmly.

  • Page 79: Electrical Maintenance

    ELECTRICAL MAINTENANCE FUSES & RELAYS Fuses and Relays : Fuse Rating Location Your car’s electrical circuits have EMS main relay fuses to protect the wiring from short Fuse circuits or sustained overload. These are located below dash board on EMS ECU IGN Main right hand side as shown in the Ignition Feed...

  • Page 80: Fuses & Relays Layout

    ELECTRICAL MAINTENANCE FUSES & RELAYS...

  • Page 81: Bulb Specification

    ELECTRICAL MAINTENANCE FUSES & RELAYS BATTERY MOUNTED FUSE BOX DETAILS Note : Replacement of battery mounted fuse box should be done only at TATA authorised service centre BULB SPECIFICATION DESCRIPTION LOCATION CAP TYPE SPECIFICATION Head lamp-Halogen H4 Head lamp P43t - 38 H4 12V,60/55 W Parking Lamp Front...

  • Page 82: Accessary Connectors Details

    ELECTRICAL MAINTENANCE ACCESSORY CONNECTOR ACCESSORY CONNECTOR LOCATIONS / PROVISION ON CAR 1. Connector for Fog lamp provision 2. Connector for Keyless Entry / Alarm 3. Connector for Music System 4. Connector for Music System * Above accessory connectors are apllicable based on the versions...
  • Page 83 ELECTRICAL MAINTENANCE ACCESSORY CONNECTOR ACCESSARY CONNECTOR LOCATIONS / PROVISION ON CAR...

  • Page 84: Vehicle Care

    VEHICLE CARE CAR CARE CAR CARE : Polishes : Your Car is subjected to many Polishes and cleaners can restore external influences such as climate, shine to the painted surface that has road conditions, industrial pollution oxidised and become dull. They and proximity to the sea.
  • Page 85 VEHICLE CARE CAR CARE Cleaning of Windows, Front and Clean and protect the shiny metal Rear Glasses : parts using commercially available special compounds. RFID TAG is pasted on front windshield from inside. It enables Sprinkle talcum powder on the Electronic toll collection.
  • Page 86 VEHICLE CARE CAR CARE FOLLOWING GUIDELINES WILL there is no dampness on any part HELP YOU TO PROTECT YOUR CAR of the car. FROM CORROSION EFFECTIVELY. WASHING YOUR CAR : PROPER CLEANING : HAND WASH : In order to protect your car from 1.
  • Page 87 VEHICLE CARE CAR CARE freshly tarred road, check WAXING : immediately afterwards for any Waxing polishing stains and clean them. recommended to maintain the 3. External contamination in the gloss and wet-look appearance of form of sap or industrial fall-out your paint finish.
  • Page 88 Cleaning and dressing of tyres, Bumpers and all exterior plas- tic moldings/trims. TATA MOTORS has tied up with M/s Opulent (Waxoyl brand) and M/s 3M for this world class treatment at affordable prices. This treatment is available in all authorized workshops.

  • Page 89: Maintenance

    MAINTENANCE BRAKE FLUID & WINDSHIELD WASHER RESERVOIR Open the front hood for Checking / WINDSHIELD WASHER : Topping up brake fluid & windshield washer fluid, (Refer page no. 37 for opening & closing of front hood.) BRAKE FLUID LEVEL : Windshield washer reservoir Windshield washer fluid container is located inside hood.

  • Page 90: Engine Compartment Cover

    OPENING & CLOSING OF ENGINE MAINTENANCE COMPARTMENT COVER Open the rear engine inspection REFITTING OF ENGINE compartment cover / lid for Checking COMPARTMENT COVER / Topping up engine oil, coolant level & Air filter element cleaning. OPENING ENGINE COMPARTMENT COVER : For opening engine compartment cover - 1) Place the cover &...

  • Page 91: Engine, Oil & Coolant

    MAINTENANCE ENGINE OIL & ENGINE COOLANT ENGINE OIL LEVEL oil level regularly could lead to serious trouble due to insufficient oil. ENGINE OIL TOP-UP Remove the oil filler cap and pour oil slowly through the filler hole to bring the oil level to the upper limit on the dipstick.

  • Page 92: Air Filter & Spark Plug

    MAINTENANCE AIR FILTER & SPARK PLUG Always use a genuine air filter Check coolant level in ‘No-Loss element. (Reservoir) tank, if lower than the MAX leve, then add specific The air filter is located on the LH side premixed coolant (50:50) upto of the engine compartment.

  • Page 93: Tyre

    MAINTENANCE TYRES Tyres Under inflated tyres reduce your comfort in car handling and are prone Check for inflation and condition of to failures due to high temperature. your car tyres periodically. They also cause uneven wear and more fuel consumption. CAUTION Every time you check inflation pressure, you should also...
  • Page 94 MAINTENANCE TYRES Repairing a Tyre : inside the tyre. Removal of this layer due to scratching may Mark the tyre position (if original cause gradual loss of air and colour dot mark is not visible) with deflation. respect to valve stem hole to ensure that the tyre is refitted in the original 3.

  • Page 95: Wheel Alignment & Catalytic

    MAINTENANCE TYRES & BATTERY Wheel alignment : Use of any other petrol or adulterated fuel can increase Incorrect wheel alignment causes pollutants excessive and uneven tyre wear. permanatly damage the catalytic Check wheel alignment at specified converter.. intervals from our authorised dealers.
  • Page 96 MAINTENANCE BATTERY Check the battery for proper to explode causing very serious electrolyte level and corrosion on the injuries. terminals. Keep all sparks & open flames 1. Check the battery for electrolyte and smoking materials away level against the marking on the from the battery.

  • Page 97: Important Technical Information

    IMPORTANT TECHNICAL INFORMATION LUBRICANTS & COOLANTS PLEASE USE ONLY FOLLOWING GENUINE OILS, COOLANTS , LUBRICANTS , ANTI RUST & SOUND DEADENING COATS, WINDSCREEN SEALANT, BRANDED BY TATA MOTORS FOR OPTIMUM PERFORMANCE OF YOUR CAR... ITEM SPECIFICATION COMPANY & BRAND ENGINE OIL...

  • Page 98: Fuel, Lubricants & Coolants

    FUEL, LUBRICANT & IMPORTANT TECHNICAL INFORMATION COOLANTS FUEL : COOLANTS : Vehicles with catalytic converter : Presence of dirt in coolant chokes up passages in radiator, cylinder Unleaded regular grade petrol head and crankcase, thereby confirming to IS 2796/DIN 51607 (or causing overheating of engine.

  • Page 99: Oil Filling & Drain Points

    IMPORTANT TECHNICAL INFORMATION OIL FILLING & DRAIN POINTS Engine Oil Filling Cap : Engine Oil Drain Plug : Transaxle Oil Drain Plug : Transaxle Oil Level Plug : Transaxle Oil Filling Plug :...

  • Page 100: Technical Specification

    IMPORTANT TECHNICAL INFORMATION TECHNICAL SPECIFICATION 1. ENGINE Model : TATA 273 MPFI Bi-fuel (Gasoline/CNG) Type : 4 Stroke, water cooled, multipoint fuel injection system, SOCH No. of Cylinders : 2, Inline Bore / Stroke : 73.5 mm x 73.5 mm. Capacity : 624 cc, Max.
  • Page 101 IMPORTANT TECHNICAL INFORMATION TECHNICAL SPECIFICATION 4. SUSPENSION Front : Independent, Lower wishbone, McPherson Strut type, with anti-roll bar. (For CX & LX versions) Rear : Independent, Semi-trailing arm with coil spring and hydraulic shock absorbers. 5. STEERING Type : Mechanical Rack & Pinion steering gear with steering column.
  • Page 102 IMPORTANT TECHNICAL INFORMATION TECHNICAL SPECIFICATION 11. PERFORMANCE Max. speed : 105 kmph Max. Gradiability @ rated GVW : 30% 12. WEIGHTS (kg) (TOLERANCE AS PER EEC 92/21) Complete vehicle kerb weight : 700 (STD) as per ISO:1176 (with spare 735 (CX) wheel &...

  • Page 103: Dimensions

    IMPORTANT TECHNICAL INFORMATION DIMENSIONS MAIN CHASSIS DIMENSIONS (IN mm) Wheel Base : 2230 Track Front : 1325 Track Rear : 1315 Front Overhang : 464 Rear Overhang : 405 Overall Length : 3099 Max. Width : 1495 - Over body 1750 - Over ORVM Overall Height (Unladen / laden) : 1652 / 1613...

  • Page 104: Car Identification

    CAR IDENTIFICATION LOCATION OF AGGREGATE NUMBER Chassis Number Punching on Chassis Number Plate mounted RH Front door ‘B’ Pillar on front cross member, below bonnet Transaxle Number Location Engine Number Location...

  • Page 105: Service Maintenance Schedule

    SERVICE MAINTENANCE SCHEDULE OPERATION FREQUENCY ( Km ) GENERAL 1 Wash the vehicle & clean condenser fins Every Service • • • • • • • • • • • 2 Check & top up fluids (if required) : Every Service •...
  • Page 106 SERVICE MAINTENANCE SCHEDULE OPERATION FREQUENCY ( Km) 5 Replace the low pressure filter cartridge with ‘O’ ring 50000 • • 6 Check Pressure gauge working Every service • • • • • • • • • • • 7 Replace the pressure regulator’s filter , O-ring and 50000 •...
  • Page 107 - At 20000-20500 km. OR 24 months whichever is eariler All services other than free services are chargeable. Servicing of the car can be done at any TATA MOTORS Authorised Dealer Workshop, TATA MOTORS Authorised Service Centre (TASC) or TATA MOTORS Authorised Service Point (TASP).

  • Page 108: List Of Approved Cng

    LIST OF APPROVED CNG CYLINDER TESTING STATION M/S UTTAM SPECIAL GASES PVT. LTD. M/S METRO CYLINDER TESTING CO. F-90/5 OKHALA INDUSTRIAL AREA, LTD. PHASE-1, NEW DELHI - 110020 72-10, 26 KM STONE, ROHTAK ROAD, MUNDKA UDHYOG NAGAR, M/S ASCO INDUSTRIAL CORPORATION GHEVRA EXTN., NEW DELHI-110041 7A, INDUSTRIAL ESTATE, SONIPAT - 131001 (HARYANA)

  • Page 109: Record Of Services Performed

    RECORD OF SERVICE PERFORMED Recommended Servicing Repair Service Odometer Dealer's Sign. Order Date Reading KMs. & Stamp At km 1000 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 1,00,000 1,10,000 1,20,000 1,30,000 1,40,000 1.50,000 1,60,000 1,70,000...
  • Page 110 RECORD OF REPAIRS CARRIED OUT Chassis No.: SERVICING Odometer Repair DATE PARTICULARS OF REPAIR DEALER’S Reading Order SIGNATURE & STAMP...

Table of Contents