Power Socket, Cup Holder - TATA Motors Nano Owner's Manual & Service Book

AN OVERVIEW
FLOOR CONSOLE :
A) Power Socket or Cigarette
Lighter: (As applicable)
Power Socket Fitment Provision:
A power socket fitment provision is
given on the floor console near the
gear shifting lever.
This can be used for connecting loads
(upto 10A maximum) like the mobile
charger. To use this socket, remove
the cap first.
NOTICE
Always keep this socket covered
with the cap when not in use.
Cigarette Lighters: (If applicable)
A cigarette lighter is provided on floor
console at front.
Press the cigarette lighter in the
socket to heat up. When it reaches
the desired temperature, it will pop
up and can be used. These lighters
will operate only when Engine is ON
or Ignition key in ON position.
32
POWER SOCKET & CUP HOLDER
CAUTION
Handle the lighter carefully to avoid
personal injury.
If lighter does not pop out, remove
it to avoid overheating.
Avoid smoking inside the vehicle;
it may spoil inside ambience,
interiors, upholstery etc.
B) Cup holder :
Two cup holders are provided on the
floor console near the gear shifting
lever for your convenience.
(Applicable for LX version)