TATA Motors Nano Owner's Manual & Service Book page 53

IF YOU HAVE A FLAT TYRE
Location and Removal of Spare
wheel:
Spare Wheel Location
Spare wheel is mounted on front
firewall inside the Front hood.
Open the hood (refer fuel filling section)
and rotate the wheel mounting screw
by hand in anticlockwise direction and
remove the spare wheel.
Location of Jack :
Jack Location
Jack is located below co-driver seat.
To remove jack, rotate the wing bolt
anticlockwise to lower down and
release it from mounting hook. While
restoring, engage jack in mounting
hook, position it properly and rotate
wing bolt clockwise to raise the jack
till it secures properly.
INCASE OF EMERGENCY
Location of Wheel spanner and
Tow hook.
They are located below Driver seat
behind battery in a tool kit bag
Advance Warning Triangle:
Advance warning triangle is located
behind rear seat back rest below
parcel shelf in a bag. Unlock the rear
seat backrest and remove it when
required.
Changing the flat tyre
Block the wheel which is diagonally
opposite to the flat tyre.
Take out wheel cover (If fitted) and
loosen the wheel mounting bolts of
flat tyre. (Do not remove the flat tyre
at this stage).
Engage the jack properly at correct
jacking point (In between dimple
marks provided at front & rear sides).
Rotate the jack screw in clockwise
direction using wheel spanner to lift
the vehicle till flat tyre is free from
ground.
Jacking Points
51