Combination Switch - TATA Motors Nano Owner's Manual & Service Book

AN OVERVIEW
Single Stalk Combination Switch:
(For Standard & CX Versions)
Single Stalk Combination Switch is
provided on right hand side of steer-
ing column. It has wiper control,
direction indicator and light control
switches.
1) Light stalk:
Outer rotary switch on the stalk is
provided for selecting Position
(Parking) or Head lamp. It operates
with Ignition switch in "IGN" position.
a) Head / Position lamp OFF.
Head lamp, position (Parking) lamp
and tail lamp will be OFF in this
position.
20

COMBINATION SWITCH

b) Position lamp ON.
Position (Parking) lamp and tail lamp
will be ON in this position.
c) Head / Position lamp ON.
Head lamp, position (Parking) lamp
and tail lamp will be ON in this
position. Pull the lever to select high
beam flash (spring loaded). Push
towards dashboard to select high
beam.
2) Wiper Rotary Switch :
Inner rotary switch on the stalk is
provided for front windshield wipe &
wash. The top (1st) position denotes
wash (spring return). First position
below "OFF" is for low speed wipe
and second position is for high speed
wipe.
Wipe and wash are separate
functions.