Wallplate Installation - Honeywell FocusPRO TH6000 Series Installation Manual

Installation Guide

Wallplate installation

1. Separate wallplate from thermostat.
2. Mount wallplate as shown below.
Remove battery holder.
Pull here to remove wallplate
from new thermostat.
CAUTION: ELECTRICAL HAZARD
beginning installation.
MERCURY NOTICE
place the old control in the trash. Contact your local waste management authority for
instructions regarding recycling and proper disposal.
69-2695EFS— 01
Insert reference card after wallplate is
M29433
2
It's easier to grasp the wallplate
and remove it after completely
removing the battery holder.
Mounting screws
MCR29434
MCR29435