Table of Contents
Advertisement
Wallplate Installation
1. Separate wallplate from thermostat.
2. Mount wallplate as shown below.
Back of
Thermostat
Drill 3/16" holes for drywall. Drill 7/32" holes for plaster.
Wall
anchors
CAUTION: ELECTRICAL HAZARD
Can cause electric shock or equipment damage. Disconnect power supply before
beginning installation.
MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed tube, do not
place the old control in the trash.
33-00236
Wire hole
Wallplate
2
Wallplate
Mounting
screws
Advertisement
Table of Contents
