Table of Contents
Advertisement
Activating the answer machine
~
(Enter your own number and allow the phone to ring
until you hear the message: "Please enter PIN")
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deacti-
vated remotely.
Locating a handset
("paging")
You can locate your handset using the base station.
◆
¢
Briefly press the registration/paging key on the
base station (
page 1).
◆
All handsets will ring simultaneously ("paging"),
even if the ringer tones are deactivated.
¢
End paging: briefly press the register/paging key on
the base station (
page 1) or the talk key
handset.
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset A68H) recommended).
Please note:
Each additional handset must be registered on the
base station in order for it to work properly!
For automatic registration of handsets to
Gigaset A680/A685, see
Manual registration of handsets to
Gigaset A680/A685
¢
1. On the handset:
¢
¢
MENU
Handset
OK
tem PIN of the base station (default is 0000)
Registering flashes in the display
2. On the base station: within 60 sec. of entering the
¢
system PIN, press and hold the registration/paging
key (
page 1) (min. 3 sec.).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting the
¢
base station to its default settings. This will also reset
every other setting
If you have only registered handsets for other GAP-
¢
compatible devices, these can only be de-registered
with a hardware reset
¢
c
¢
page 5.
¢
¢
¢
Settings
OK
¢
Register HS
Enter the sys-
OK
.
page 11.
page 11.
10
Using several handsets
~
Making internal calls
Internal calls are no-cost calls to other handsets that
are registered to the same base.
Press the
INT
When an internal participant answers you can speak
to them. To end the call, press
Internal consultation call/connecting
a call
You are in conversation with an external participant.
Press the
INT
ticipant hears the hold music.
◆
Before the internal participant has answered,
press the end call key
participant who answers the call.
◆
on a
After the internal participant has answered, you
can talk to him. Press the end call key
diverted, or press the display key
reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal par-
ticipant can listen in on this call and take part in the
conversation (conference).
Precondition: The
vated.
Activating/deactivating listening in
¢
¢
MENU
Settings
Listening in
Internal listening in (conference)
You want to listen in to an existing external call.
.
Briefly press and hold the
the call. All participants hear a signal tone.
To end: press the end call key
a signal tone.
If the first internal participant presses the end call key
a
, the handset that has "listened in" remains con-
nected to the external participant.
display key. All handsets are called.
a
.
key to call all handsets. The external par-
a
; the call is diverted to the
function must be acti-
Listening in
¢
¢
¢
¢
OK
Base
‰
OK (
= on)
c
key. You can listen in to
a
. All participants hear
a
; the call is
"
; you are
OK
Advertisement
Table of Contents
