Checking For Shipping Shortage And Damage; Unpacking The Equipment; Required Personnel; Required Tools - HP StorageWorks XP10000 Disk Array Site Prep Manual

Checking for shipping shortage and damage

Upon delivery of each equipment shipment:
1.
Check the carrier's bill of lading to ensure that the items listed match the items
delivered. Notify the carrier immediately if there are any discrepancies or missing
items.
2. Inspect all shipping containers for signs of damage, such as dents, scratches, cuts,
or water marks.
3. If you see any damage to the containers:
a. Note on the bill of lading that there is apparent damage, subject to inspection.
b. Arrange for the carrier's representative and an HP representative to be present
when the item in question is unpacked.
c. Contact your HP representative, who will make sure any damaged components
are replaced, regardless of the circumstances and without waiting for any
claim settlements.

Unpacking the equipment

HP representatives will supervise the unpacking and moving of the disk array equipment.
It is your responsibility to provide the people, tools, and equipment necessary to perform
these tasks.

Required personnel

HP recommends that three physically able personnel be available to assist with
off-loading the disk array equipment from the pallet. Personnel must be knowledgeable
and experienced with the safe handling of large, heavy, and sensitive computer
equipment.

Required tools

• Claw hammer (if full packaging with wooden crate)
• Ratchet wrench or box-open end wrench sizes 11mm (7/16") and 19mm (3/4"),
or adjustable end wrench
• 6mm hex wrench
• Scissors or box knife to cut polyester banding
• Safety glasses
• Short stepladder (helpful, but not required)
60
Delivery and unpacking