Change Password - ProSoft Technology RLXIB-IHA RadioLinx User Manual

802.11a industrial hotspot
Table of Contents

Advertisement

Radio Configuration / Diagnostic Utility
User Manual
Field
Enable
Allow Any Manager
Allow IP
Community String
Permission
Read only
Read/Write
Save
Cancel
The RLXIB-IHA SNMP agent supports SNMP protocol version 1.4 and 2 MIBs:
RFC12133-MIB (partial; internet.mgmt.MIB-2.system, .interfaces, .snmp)
ROMAP-MIB (included on the CD; internet.private.enterprises.romap)
It also supports a selection of standard SNMP traps, including Cold Start, which
is sent when the radio initializes.

4.4.2 Change password

Field
Old
New
Repeat
Save
Cancel
You can enter any alphanumeric value between one and 31 characters. The
password is case-sensitive.
If you forget your password, you will be unable to change the radio settings. To
get the default password again, see Troubleshooting.
Page 64 of 123
Description
Click this button to enable the following SNMP Agent settings.
Select this option to allow any user to change the radio settings from
any computer using SNMP.
Select this setting to restrict access to an SNMP manager with a
particular IP address, then enter the IP address in the Allow IP field.
Enter a "community string" (essentially a password) that a manager
must use to access the radio's SNMP agent.
Select the permission level to assign to this radio.
An SNMP Agent can view but cannot modify radio settings.
An SNMP Agent can view and modify radio settings.
Saves your changes and updates the radio configuration.
Discards your changes without updating the radio configuration.
Description
Enter the current password in this field. The default password is
"password" (lower case, no quotes). This entry must exactly match the
current password, otherwise the change will be rejected.
Enter the new password in this field. Passwords are case sensitive.
Confirm the new password in this field. This entry must exactly match
the password you entered in the "New" field, otherwise the change will
be rejected.
Saves your changes and updates the radio configuration.
Discards your changes without updating the radio configuration.
RLXIB-IHA ♦ 802.11a
RadioLinx® 802.11a Industrial Hotspot
ProSoft Technology, Inc.
July 25, 2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RLXIB-IHA RadioLinx and is the answer not in the manual?

Questions and answers

Table of Contents