Extension Cords; Changing Operational Motor Voltage - Delta 43-290C Instruction Manual

Extension Cords

Make sure your extension cord is in good condition an is a 3-wire extension cord which has a 3-prong grounding type plug
and matching receptacle which will accept the tool's plug. When using an extension cord, be sure to use one heavy
enough to carry the current of the tool. An undersized cord will cause a drop in line voltage, resulting in loss of power and
overheating.

Changing Operational Motor Voltage

Figure 20
This chart shows correct power input for single phase
110-120 VAC.
Figure 21
This chart shows correct power input for single phase
220-230 VAC.
11
Fig. 20
Fig. 21