Using The Cd Player - JVC RD-MD5 Instructions Manual

RD-MD5(B)-e.fm Page 9 Wednesday, December 2, 1998 11:40 AM

Using the CD Player

Number Keys
PROGRAM
0
CD
4
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can use Normal, Random, Program or Repeat Play. Repeat
Play can repeat all the tracks or just one of the tracks on the CD.
Here are the basic things you need to know to play a CD and locate
the different tracks on it.
The Quickest Way To Start a CD Is With the
One Touch Operation
Press the CD6 button.
• The power is automatically turned on. If a CD is already
inserted, it will start playing from the first track.
• If no CD is inserted, "CD NO DISC" appears on the display
and the CD Player remains in Stop mode.
To Insert a CD
1. Press the 0 CD button on the Unit.
The tray opens.
2. Place a CD, with its label side up as shown
below.
3. Press the 0 CD button again to close the
tray.
• To close the tray and play the CD, you can press the CD6 but-
ton.
• When you press the button to turn off the System, the tray will
be automatically closed, if it is open.
You can place an 8 cm (3'') CD without an adaptor.
If the CD cannot be read correctly (because it is scratched, for
example), " 0 0:00" appears on the display.
You can insert a CD while listening to the other source.
9
REPEAT
6
CD
RANDOM
6
CD
¢
7
4
7
CD indicator
Basics of Using the
CD Player-Normal Play
To Play a CD—————————————
1. Insert a CD.
2. Press the CD6 button.
•
•
To stop playing the CD, press the
The following information for the CD is displayed.
To stop playing and remove the CD, press the
open the tray.
To pause, press the CD6 button. The playback time blinks on
the display.
To cancel pause, press the same button again. Play continues
from the point where it was paused.
Locating a Track with Remote Con-
trol Directly —————————————
During playback or in Stop mode, press the number keys on the Re-
mote Control to directly play a track.
To directly play the track 5, press 5.
To directly play the track 15, press +10 then 5.
To directly play the track 20, press +10 once then press 10.
To Select a Track ——————————
During playback, press the
to select the track you want.
The selected track starts playing.
•
DISPLAY/CHARA.
JOG dial
0
CD
¢
Track number, Playing
Play mode indicator time, Preset number
OVER indicator which lights up if the
Music calender
number of tracks of the CD exceeds 20.
The first track of the CD begins playing.
Track number
Playback time
The track number that has been played disappears from the
music calender.
The CD Player automatically stops when the last track of the
CD has finished playing.
7
button.
Total track number Total playback time
4 ¢
or button or turn the JOG dial
¢
Press the button once or turn the JOG dial to the right by 1
click to skip to the beginning of the next track.
Repeat
indicator
0
CD button to