Using The Cd Player - JVC RV-DP200BK Instructions Manual

Using the CD Player

TIMER (AC)
POWER
CLOCK TIMER ON/OFF
SLEEP
DOWN UP SET
PROGRAM
Number
RANDOM
Keys
AUTO
PRESET REPEAT
6
TUNER
AUX CD TAPE
CD BAND
FM MODE
4
REVERSE MODE REW FF
MULTI CONTROL
DISPLAY
MID /
TREBLE
SUPER WOOFER
VOLUME
VOLUME
RM-SRVDP100
REMOTE CONTROL
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can use Normal, Random, Program or Repeat Play. Repeat
Play can repeat all the tracks or just one of the tracks on the CD.
Here are the basic things you need to know to play a CD and locate
the different tracks on it.
The Quickest Way To Start a CD Is With the
One Touch Operation (effective only when
the System is operated on AC power)
Press the CD 6 button.
• The power is automatically turned on. If a CD is already
inserted, it will start playing from the first track.
• If no CD is inserted, "NO DISC" appears on the display and the
CD Player remains in Stop mode.
Setting a CD
1. Turn the CD cover knob counterclockwise
to open the CD cover.
2. Place a CD, with its label side up as shown
below.
CD cover
3. Close the CD cover until it clicks.
To remove the CD, open the CD cover in Stop mode.
You can place an 8 cm (3'') CD without an adaptor.
If the CD cannot be read correctly (because it is scratched, for
example), " 0 0:00" appears on the display.
You can place a CD while listening to the other source.
PROGRAM
RANDOM
REPEAT
SUPER WOOFER
7 VOLUME
¢
STANDBY
POWER
6
CD
Knob
7
Jog dial
4
¢
VOLUME
/
MID TREBLE
PRESET ONE TOUCH MID / BAND
TUNING REC TREBLE MULTI CONTROL
C D TAPE TUNER AUX
REW STOP FF
OPEN
Basics of Using the
CD Player-Normal Play
To Play a CD—————————————
1. Set a CD.
2. Press the CD
The first track of the CD begins playing.
• The CD Player automatically stops when the last track of the
CD has finished playing.
To stop playing the CD, press the
The following information for the CD is displayed.
Total track number
To pause, press the CD
the display.
To cancel pause, press the same button again. Play continues
from the point where it was paused.
Note: Do not open the CD cover during playback.
Locating a Track with Remote Con-
trol Directly —————————————
During playback or in Stop mode, press the number keys on the Re-
mote Control to directly play a track.
To directly play the track 5, press 5.
To directly play the track 15, press +10 then 5.
To directly play the track 20, press +10 once then press 10.
CD PICTH CONTROL
Track number, Playing
time, Preset number
Repeat Play mode indicator
indicator
6
button.
Track number
Playback time
7
button.
Total playback time
6
button. The playback time blinks on
10