Fuses; Winch (If So Equipped); Winch Control Switch (If So Equipped); Fairlead (If So Equipped) - BOMBARDIER Quest 500 2002 Operator's Manual

Do not exceed the rating capacity. See
SPECIFICATIONS.
An auxiliary supply is available to con-
nect additional accessories through a
connector at the rear of vehicle. See an
authorized Bombardier ATV dealer for
more details.

26) Fuses

The electrical system is protected with
fuses. Refer to MAINTENANCE for de-
tails.
The fuse block is located at the rear of
the vehicle, on left side, under fender.
V04G01Y
1. Fuse block

Winch (if so equipped)

Located behind front skid plate.
V01A1OY
1. Winch
2. Front skid plate
1
1 2
Winch Control Switch
(if so equipped)
Located on the LH side of the front
fender.
To take out wire rope from winch, turn
switch button counterclockwise.
To get wire rope into the winch, turn
the switch button clockwise.
Refer to ATV Winch Operator's Manu-
al for more informations.
2
1
V01A1KY
1. In
2. Out

Fairlead (if so equipped)

Located on the front skid plate.
The fairlead is used to prevent the
damages to the vehicle and guide the
wire rope into the winch.
2
V01A1OZ
1. Front skid plate
2. Fairlead
1
57