Table of Contents
Advertisement
1.2.
How to recognize that Pb Free solder is used
(Example: Handset P.C.B.)
IC901
Note:
The location of the "PbF" mark is subject to change without notice.
2 FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover the plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not touch IC or LSI pins with bare fingers.
3 CAUTION
1. Danger of explosion if battery is incorrectly replaced.
2. Replace only with the same or equivalent type recommended by the manufacturer.
3. Dispose of used batteries according to the manufacture's Instructions.
Marked
(Component View)
IC201
IC202
5
KX-TG2480BXS / KX-TGA248BXS
Advertisement
Table of Contents
Troubleshooting
