Adjustment And Test Mode; Test Mode Flow Chart For Base Unit - Panasonic KX-TG2480BXS Service Manual

8 ADJUSTMENT AND TEST MODE

8.1.

Test Mode Flow Chart for Base Unit

8.1.1. Test Burst Mode
Note:
(*1) When you check test mode, connect to the external Buttons because Base Unit has only LOCATOR key. Refer to "For Test
Mode" in Base Unit Reference Drawing (P.38). -Insert AC adaptor during checking.
(*2) When you select "Select Line Mode". you can see selected LINE-LED lights. If you press Button-3 five times, base unit is
reset to the Factory settings (VML-LED lights).
(*3) Refer to Check Table for RF part (P.26) and RX-CW TEST Mode (P.34) for proper Handset Settings.
(*4) If you enter the test mode correctly, GHARGE LED flashes once. Line1 is selected and you are in "Select Antenna mode".
29
KX-TG2480BXS / KX-TGA248BXS