Panasonic KX-TG2480BXS Service Manual page 32

KX-TG2480BXS / KX-TGA248BXS
8.1.4. Adjustment Mode
Cross Reference
Check and Adjust X801 (Base Unit) Frequency (P.37)
Note:
(*1) When you check test mode, connect to the external Buttons because Base Unit has only LOCATOR key. Refer to "For Test
Mode" in Base Unit Reference Drawing (P.38). -Insert AC adaptor during checking.
(*2)Refer to the table below, if using Spectrum Analyzer for checking.
(*3) If you enter the test mode correctly, GHARGE LED flashes once. Line1 is selected and you are in "Select Antenna mode".
32