Samsung Galaxy Note 3 Instruction Manual page 516

Pairing/Connecting with
Bluetooth device
To transfer data between your terminal and other
Bluetooth device, perform paring with the device
and register it to the terminal beforehand. And
then perform connection.
• Depending on Bluetooth device, only pairing
may be performed or pairing and connection
may be performed successively.
1
From the Home screen,
"Settings" → "Connections" tab →
"Bluetooth"
2
Tap
• Detected Bluetooth devices are displayed
by list.
• If no Bluetooth devices are displayed, tap
"Scan" to re-search.
3
Tap a device you want to connect
4
Confirm a pass code or enter pass
code (PIN) → "OK"
• Even for devices requiring entry of
pass code when pairing, once pairing
is performed, entering pass code is not
necessary for next connection.
Data communication
514
→