Samsung Galaxy Note 3 Instruction Manual page 420

• Setting "Wi-Fi option password" is required
for using DOCOMO services/cloud via Wi-Fi
connection if Wi-Fi is being used. From the
Home screen,
tab → "docomo service/cloud" → "Wi-Fi
settings for docomo apps" to set up.
• This terminal can detect your location
information without turning on Wi-Fi
function. From the Home screen, tap
→ "Settings" → "Connections" tab → "Wi-Fi"
and tap
allow scanning".
■ Enabling Wi-Fi and connecting to network
1
From the Home screen,
→ "Connections" tab → "Wi-Fi"
2
Tap
• Scan available Wi-Fi networks
automatically and show a list of network
detected.
3
Tap a Wi-Fi network you want to
connect → "Connect"
• To connect to a Wi-Fi network protected
by security, enter a password (security
key) and tap "Connect".
Connecting via WPS
Wi-Fi network with "WPS available" shown
can be connected via WPS (Wi-Fi Protected
Setup). On the Wi-Fi network list screen,
→ "WPS push button"/"WPS PIN entry" →
Operate on access point device.
→ "Settings" → "General"
→ "Advanced" → Mark "Always
418
→ "Settings"
Settings