Samsung Galaxy Note 3 Instruction Manual page 422

■ Setting Wi-Fi access point
• About information necessary for connection,
refer to user manual of wireless LAN access
point you use. When connecting to company
LAN or using Public wireless LAN service, ask a
network administrator or service provider about
the required information for connecting.
• When wireless LAN access point is set to
connect to a MAC address registered device
only, register MAC address of this terminal to
the wireless LAN access point. From the Home
screen, tap
tab → "Wi-Fi" →
MAC address. You can view IP address of the
connected Wireless LAN access point.
1
From the Home screen,
→ "Connections" tab → "Wi-Fi"
2
→ "Add Wi-Fi network"
3
Enter network SSID → Set security
(Authentication method)
• The possible certificate method is "WEP",
"WPA/WPA2/FT PSK", "802.1x EAP".
4
Enter a password → "Connect"
• If you set security to "None", entering
password is not needed.
→ "Settings" → "Connections"
→ "Advanced" to check
420
→ "Settings"
Settings