Wiring Diagram - Gree HLR35SM/NaA-M Service Manual

MODULAR MINI CHILLER INSTALLATION
Note
1.The power supply wire must be copper core wire, and the working temperature can not be
higher than limited value.
2.If the length of power supply wire is longer than 15meters, do please increase the section
area to avoid any accident due to over-load.
3. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similar qualified person in order to avoid a hazard.
4. The appliance shall be installed according to national regulations
5. When installing the connection wiring for manual controller, the wire must be put inside a
separate protective sheath to avoid direct sunshine.

3.4 Wiring Diagram

3.4.1 Wiring Diagram- Integral Type
HLR35SM/NaA-M:
33