MODULAR MINI CHILLER
UNITS INSTALLATION
1 UNITS INSTALL
1.1 Installation Positions
For indoor unit:
Fix the indoor unit bracket to the wall using appropriate plugs and screws.
Hang the indoor unit on the top wall mounting bracket.
Fix the indoor unit at the bottom side using appropriate plugs and screws.
For outdoor unit:
The installation is frost-free.
The space around the unit is adequate for servicing.
The space around the unit allows for sufficient air circulation.
There is no danger of fire due to leakage of flammable gas.
All piping lengths and distances have been taken into consideration.
1.2 Matters need Attention
The indoor unit is packed in a cardboard box, fixed by straps.
At delivery, the unit should be checked and any demage should be reported immediately
to the carrier claims agent.
Check if all indoor unit accessories are enclosed.
The indoor unit is heavy and should be lifted by two persons.
1.3 Dimension Data
Integral Type
HLR35SM/NaA-M, HLR45SM/NaA-M
Water Inlet
Water Outlet
Basement
fixing hole
12mm
Diameter
INSTALLATION
29