System Connections; Connection To A Satellite Tuner - JVC HM-DR10000EU Instructions Manual

SYSTEM CONNECTIONS

Connection To
A Satellite
Tuner
Simple Connections
This is an example of simple connection if you don't
have a decoder.
Connect the satellite tuner to the video recorder's AV2 IN/
DECODER connector, then connect the recorder's AV1 IN/OUT
connector to the TV's 21-pin SCART connector.
Outdoor Unit
Satellite Tuner Unit
DECODER VCR
Mains outlet
Back of Recorder
IMPORTANT
When you set "AV2 SELECT" to "SAT" (
if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.
In this case, be sure to set the AV1 OUT switch on the rear panel to COMP.
Satellite Cable
TV
AV1 OUT switch
AV1 OUT
S OUT S IN
COMP. Y/C
(S-1)
AV1 IN/OUT
AV2 IN/DECODER
DV IN
pg. 54), it is possible to view a satellite broadcast with the TV set to its AV mode even
NOTES:
Set "AV2 SELECT" to "AV2" or "SAT". (
You can use Automatic Satellite Program Recording function
( pg. 37) with this connection.
To record a programme via the satellite tuner, select L-2 mode
by pressing NUMBER keys and/or TV PROG so that "L-2"
appears on the display panel.
If both the satellite tuner and the TV have S-VIDEO connec-
tors, you can enjoy high-quality S-VHS pictures. Connect
your recorder and the TV via S-VIDEO connection (
then connect the satellite tuner's S-VIDEO and AUDIO output
connectors to the recorder's S IN and AUDIO IN connectors
on the rear panel. Select S-1 mode by pressing NUMBER keys
and/or TV PROG, so that "S-1" appears on the display panel.
For details, refer to the instruction manual for the satellite
tuner.
Aerial
Aerial connector
TV Aerial
cable
ANT. IN
RF OUT
21-pin AV input
connector (SCART)
SYNCHRO EDIT
JLIP
R.PAUSE
L
(L-1)
AUDIO
R
OUT IN (S-1)
(L-2)
Back of TV
ANT. IN
ANT. OUT
57
EN
pg. 54)
pg. 5),