Recording Mode - JVC HM-DR10000EU Instructions Manual

Compatibility Of Cassettes And

Recording Mode

Cassette
D-VHS
D-VHS Yes
S-VHS No
VHS No
NOTES:
The D-VHS (MTP), S-VHS and VHS mode recordings are
possible with this recorder.
To record in the D-VHS mode, use a D-VHS cassette.
To record in the S-VHS mode, you can use a S-VHS or D-
VHS cassette.
To record in the VHS mode, you can use a VHS, S-VHS or
D-VHS cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Recording Mode
S-VHS VHS
Yes Yes
Yes Yes
No Yes
Record safety tab
S-VHS/VHS Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
The TV PROG dial can also be used to select a
channel.
SET TAPE SPEED
3
Press SP/LP ( ). Check the SP/LP indicator on the
front display panel to confirm the selected tape speed.
START RECORDING
4
Press and hold RECORD and press PLAY on the remote
control, or press RECORD on the recorder.
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette.
If "DIRECT REC" is set to "ON", the programme
that appears on the TV screen will be recorded
( pg. 13).
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP. Then press EJECT to remove the cassette.
23
EN