Recording; Basic Recording - JVC HM-DR10000EU Instructions Manual

22
EN
Basic

Recording

TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
Turn on the TV and select the AV mode.
STD indicator LS3 indicator
2
1
4
NUMBER
7
1
2
RECORD
2 3
5 6
3
4
8 9
4
STD/LS3 (SP/LP)
0
3
TV PROG
PLAY
PAUSE
D-VHS Recording
LOAD A CASSETTE
1
Insert a D-VHS cassette with the record safety tab intact.
The recorder power comes on automatically and the
counter is reset to 0:00:00.
The STD (or LS3) indicator lights and the D-VHS
recording mode is selected automatically.
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
The TV PROG dial can also be used to select a
channel.
SET TAPE SPEED
3
Press STD/LS3 (
to confirm the selected tape speed.
START RECORDING
4
Press and hold RECORD and press PLAY on the remote
control, or press RECORD on the recorder.
If "DIRECT REC" is set to "ON", the programme
that appears on the TV screen will be recorded
( pg. 13).
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP. Then press EJECT to remove the cassette.
NOTE:
To record in the S-VHS or VHS mode on a D-VHS cassette,
press D-VHS so that the STD (or LS3) indicator goes off (
26).
RECORDING
). Check the STD or LS3 indicator
pg.