System Connections; Connecting To A Satellite Receiver - JVC DRM10S Instructions Manual

SYSTEM CONNECTIONS

Connecting To A Satellite Receiver

Connect the satellite receiver to the L-2 IN connector,
then connect the L-1 IN/OUT connector to the TV's
connector via cable adapters.
Make sure that the unit is turned on to view satellite
broadcast with this connection.
Outdoor unit
Satellite cable
Satellite receiver
NOTES:
Set "L-2 SELECT" to "VIDEO". (
You can use the Automatic Satellite Programme Recording
function (
To record a programme via the satellite receiver, select L-2
mode by pressing CH +/– so that "L-2" appears on the front
display panel.
For details, refer to the instruction manual of the satellite
receiver.
Aerial
TV aerial cable
ANTENNA IN
ANTENNA OUT
Input Cable Adapter
Output Cable Adapter
pg. 61) with this connection.
Aerial connector
Back of TV
Audio/video input
connectors
Mains outlet
Back of unit
85
EN
pg. 81)