Timer Recording; Vcr Plus+ Timer Programing - JVC DR-MH20S Instructions Manual

TIMER RECORDING

46
EN
VCR Plus+ Timer Programing
®
You can program this unit to timer-record as many as 32 programs.
With the VCR Plus+ system, timer programing is greatly simplified
because each TV program has a corresponding code number
which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
0 – 9
CANCEL
CLEAR
DISPLAY
VPS/PDC#
1
Load a recordable disc if recording to DVD.
2
Press PROGRAM to access the program top screen.
3
Press rtw e to select "VCR PLUS+", then press ENTER.
When "PROGRAM FULL DELETE UNWANTED TIMER
PROGRAMS" appears on the TV screen, you need to cancel some of
the reserved programs. (
4
Press the number keys to
enter the VCR Plus+ number of a
program you wish to record.
OR
Press rtw e to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all needed
numbers.
5
Press rt to select "RECORD TO", then press ENTER. Press
rt to select the desired recording deck, then press ENTER.
6
Press rtw e to select "CONFIRM", then press ENTER.
If the number you entered is invalid, "PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY" appears on the TV
screen. Input a valid PlusCode number.
If "GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN
RETRY" appears on the TV screen, set Guide Channel Numbers
manually. ( pg. 70)
CABLE/DBS
TV DVD
PROGRAM
ENTER
RETURN
pg. 49)
1 1
3 3 PROGRAM > VCR PLUS+ (1/2)
2 2
2
PLUS CODE NO.
1 2 3 4
1
SELECT WITH [ ]
THEN PRESS [ENTER] 4
7
PRESS [PROGRAM]
TO EXIT
DELETE
RECORD TO
ENTER
PROGRAM
EXIT SELECT
7
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
program data.
To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "Changing VCR Plus+
set the Guide Channel number correctly.
8
Press rt to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
"INPUT TITLE" (
"CATEGORY" (
"WEEKLY/DAILY" (
"REC MODE" (
9
Press rt to select "OK", then press ENTER to access the
Program Confirmation screen.
10
Press w e to select "EXIT", then press ENTER to complete
timer programing.
To program another timer, press w e to select "CONTINUE", then
press ENTER.
If "PROGRAM OVERLAPPED" appears on the TV screen, see
page 49.
NOTES:
There may be cases that the VCR Plus+ Timer Programing function
prolongs the stop time of the programing.
When two successive programs are recorded on a DVD-RW disc with
the VCR Plus+ Timer Programing function, the beginning of the
second one may be left off the recording.
If the copy limited program is received during timer-recording, the unit
enters Record Pause mode. Recording starts again if it is switched to
a recordable broadcast during the time you programed.
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step 7. When this
happens, set the correct Guide Channel number for that station.
( pg. 70, "Changing VCR Plus+
Cable Box and DBS Receiver Users
To timer-record a satellite broadcast using the VCR Plus+
system:
A Perform "Cable Box and/or DBS Receiver Control Setting"
( pg. 24).
B Perform "VCR Plus+
C Leave the cable box or DBS receiver's power on.
2 3
5 6
8 9
0
DELETE ALL
DVD
CONFIRM
® Setting" (
pg. 52, "Modify Title Name")
pg. 53, "Modify Category")
pg. 47, "Weekly/Daily Recording")
pg. 37, "Recording Mode")
® Setting")
® Timer Programing" (
pg. 70) and
pg. 46).